Bonjour à toutes et tous
De façon à avoir un sous-domaine pour pointer sur mon serveur Nextcloud, j'ai créé un sous-domaine via mon fournisseur de domaine, Infomaniak, que j'utilise comme DNS dynamique.
Pour lier donc dynamiquement (au cas où l'IP changerait) mon serveur et mon sous-domaine, j'utilise le service DDClient.
J'ai installé le paquet DDClient via YaST et j'ai mis à jour le fichier de configuration /etc/ddclient.conf
Il se présente ainsi :
######################################################################
##
## Define default global variables with lines like:
## var=value [, var=value]*
## These values will be used for each following host unless overridden
## with a local variable definition.
##
## Define local variables for one or more hosts with:
## var=value [, var=value]* host.and.domain[,host2.and.domain...]
##
## Lines can be continued on the following line by ending the line
## with a \
##
##
## Warning: not all supported routers or dynamic DNS services
## are mentioned here.
##
######################################################################
# daemon: consider to use /etc/sysconfig/ddclient instead of modifying here
#
daemon=300 # check every 300 seconds
#
######################################################################
syslog=yes # log update msgs to syslog
#mail=root # mail all msgs to root
mail-failure=root # mail failed update msgs to root
pid=/run/ddclient/ddclient.pid # record PID in file.
#ssl=no # use ssl-support. Works with
# ssl-library
# postscript=script # run script after updating. The
# new IP is added as argument.
#
#use=watchguard-soho, fw=192.168.111.1:80 # via Watchguard's SOHO FW
#use=netopia-r910, fw=192.168.111.1:80 # via Netopia R910 FW
#use=smc-barricade, fw=192.168.123.254:80 # via SMC's Barricade FW
#use=netgear-rt3xx, fw=192.168.0.1:80 # via Netgear's internet FW
#use=linksys, fw=192.168.1.1:80 # via Linksys's internet FW
#use=maxgate-ugate3x00, fw=192.168.0.1:80 # via MaxGate's UGATE-3x00 FW
#use=elsa-lancom-dsl10, fw=10.0.0.254:80 # via ELSA LanCom DSL/10 DSL Router
#use=elsa-lancom-dsl10-ch01, fw=10.0.0.254:80 # via ELSA LanCom DSL/10 DSL Router
#use=elsa-lancom-dsl10-ch02, fw=10.0.0.254:80 # via ELSA LanCom DSL/10 DSL Router
#use=alcatel-stp, fw=10.0.0.138:80 # via Alcatel Speed Touch Pro
#use=xsense-aero, fw=192.168.1.1:80 # via Xsense Aero Router
#use=allnet-1298, fw=192.168.1.1:80 # via AllNet 1298 DSL Router
#use=3com-oc-remote812, fw=192.168.0.254:80 # via 3com OfficeConnect Remote 812
#use=e-tech, fw=192.168.1.1:80 # via E-tech Router
#use=cayman-3220h, fw=192.168.0.1:1080 # via Cayman 3220-H DSL Router
#
#fw-login=admin, fw-password=XXXXXX # FW login and password
#
## To obtain an IP address from FW status page (using fw-login, fw-password)
#use=fw, fw=192.168.1.254/status.htm, fw-skip='IP Address' # found after IP Address
#
## To obtain an IP address from Web status page (using the proxy if defined)
## by default, checkip.dyndns.org is used if you use the dyndns protocol.
## Using use=web is enough to get it working.
## WARNING: set deamon at least to 600 seconds if you use checkip or you could
## get banned from their service.
#use=web, web=checkip.dyndns.org/, web-skip='IP Address' # found after IP Address
#
######################################################################
# you do not need to define use= if you are using DSL (ppp0)
# rc.ddclient is using "use=if, if=ppp0" as default
#
#use=ip, ip=127.0.0.1 # via static IP's
#use=if, if=eth0 # via interfaces
#use=if, if=ippp0 # when using ISDN
#use=if, if=ppp0 # when using DSL
#use=if, if=tun0 # when using tunnel device
#use=web # via web
#
######################################################################
#protocol=dyndns2 # default protocol
#proxy=fasthttp.sympatico.ca:80 # default proxy
#server=members.dyndns.org # default server
#server=members.dyndns.org:8245 # default server (bypassing proxies)
#login=your-login # default login
#password=test # default password
#mx=mx.for.your.host # default MX
#backupmx=yes|no # host is primary MX?
#wildcard=yes|no # add wildcard CNAME?
##
## selfhost dynamic addresses
## http://cms.selfhost.de/cgi-bin/selfhost?p=faq&show=113
##
# server=carol.selfhost.de, \
# protocol=dyndns2, \
# login=your-selfhost-login, \
# password=your-selfhost-password \
# your.selfhost.bz
##
## dyndns.org dynamic addresses
##
## (supports variables: wildcard,mx,backupmx)
##
# server=members.dyndns.org, \
# protocol=dyndns2 \
# your-dynamic-host.dyndns.org
##
## dyndns.org static addresses
##
## (supports variables: wildcard,mx,backupmx)
##
# static=yes, \
# server=members.dyndns.org, \
# protocol=dyndns2 \
# your-static-host.dyndns.org
##
##
## dyndns.org custom addresses
##
## (supports variables: wildcard,mx,backupmx)
##
# custom=yes, \
# server=members.dyndns.org, \
# protocol=dyndns2 \
# your-domain.top-level,your-other-domain.top-level
##
## ZoneEdit (zoneedit.com)
##
# server=dynamic.zoneedit.com, \
# protocol=zoneedit1, \
# login=your-zoneedit-login, \
# password=your-zoneedit-password \
# your.any.domain,your-2nd.any.dom
##
## EasyDNS (easydns.com)
##
# server=members.easydns.com, \
# protocol=easydns, \
# login=your-easydns-login, \
# password=your-easydns-password \
# your.any.domain,your-2nd.any.domain
##
## Hammernode (hn.org) dynamic addresses
##
# server=dup.hn.org, \
# protocol=hammernode1, \
# login=your-hn-login, \
# password=your-hn-password \
# your-hn-host.hn.org,your-2nd-hn-host.hn.org
##
## dslreports.com dynamic-host monitoring
##
# server=members.dslreports.com \
# protocol=dslreports1, \
# login=dslreports-login, \
# password=dslreports-password \
# dslreports-unique-id
##
## OrgDNS.org account-configuration
##
# use=web, web=members.orgdns.org/nic/ip
# server=www.orgdns.org \
# protocol=dyndns2 \
# login=yourLoginName \
# password=yourPassword \
# yourSubdomain.orgdns.org
##
## dnspark.com
## (supports variables: mx, mxpri)
##
# use=web, web=ipdetect.dnspark.com, web-skip='Current Address:'
# protocol=dnspark, \
# server=www.dnspark.com, \
# your-host.dnspark.com
##
## NameCheap (namecheap.com)
##
# protocol=namecheap, \
# server=dynamicdns.park-your-domain.com, \
# login=my-namecheap.com-login, \
# password=my-namecheap.com-password \
# fully.qualified.host
##
## NearlyFreeSpeech.NET (nearlyfreespeech.net)
##
# protocol = nfsn, \
# login=member-login, \
# password=api-key, \
# zone=example.com \
# example.com,subdomain.example.com
##
##
## Loopia (loopia.se)
##
# use=web
# web=loopia
# protocol=dyndns2
# server=dns.loopia.se
# script=/XDynDNSServer/XDynDNS.php
# login=my-loopia.se-login
# password=my-loopia.se-password
# my.domain.tld,other.domain.tld
##
##
## ChangeIP (changeip.com)
##
## single host update
# protocol=changeip, \
# login=my-my-changeip.com-login, \
# password=my-changeip.com-password \
# myhost.changeip.org
##
## DtDNS (www.dtdns.com)
##
# protocol=dtdns,
# server=www.dtdns.com,
# client=ddclient,
# password=my-dtdns.com-password
# myhost.dtdns.net, otherhost.dtdns.net
##
## CloudFlare (www.cloudflare.com)
##
#protocol=cloudflare, \
#zone=domain.tld, \
#ttl=1, \
#login=your-login-email, \
#password=APIKey \
#domain.tld,my.domain.tld
##
## Google Domains (www.google.com/domains)
##
# protocol=googledomains,
# login=my-auto-generated-username,
# password=my-auto-generated-password
# my.domain.tld, otherhost.domain.tld
##
## Duckdns (http://www.duckdns.org/)
##
#
# password=my-auto-generated-password
# protocol=duckdns hostwithoutduckdnsorg
##
## Freemyip (http://freemyip.com/)
##
#
# protocol=freemyip,
# password=my-token
# myhost
##
## MyOnlinePortal (http://myonlineportal.net)
##
# protocol=dyndns2
# ssl=yes
# # ipv6=yes # optional
# use=web, web=myonlineportal.net/checkip
# # use=if, if=eth0 # alternative to use=web
# # if-skip=Scope:Link # alternative to use=web
# login=your-myonlineportal-username
# password=your-myonlineportal-password
# domain.myonlineportal.net
##
## nsupdate.info IPV4(https://www.nsupdate.info)
##
#protocol=dyndns2
#use=web, web=http://ipv4.nsupdate.info/myip
#server=ipv4.nsupdate.info
#login=domain.nsupdate.info
#password='123'
#domain.nsupdate.info
##
## nsupdate.info IPV6 (https://www.nsupdate.info)
## ddclient releases <= 3.8.1 do not support IPv6
##
#protocol=dyndns2
#usev6=if, if=eth0
#server=ipv6.nsupdate.info
#login=domain.nsupdate.info
#password='123'
#domain.nsupdate.info
##
## Yandex.Mail for Domain (domain.yandex.com)
##
# protocol=yandex, \
# login=domain.tld, \
# password=yandex-pdd-token \
# my.domain.tld,other.domain.tld \
## DNS Made Easy (https://dnsmadeeasy.com)
##
# protocol=dnsmadeeasy,
# login=your-account-email-address
# password=your-generated-password
# your-numeric-record-id-1,your-numeric-record-id-2,...
##
## Infomaniak
##
ssl=yes
use=web, web=https://ipv4.infomaniak.com/ip.php, web-skip='IP:'
protocol=dyndns2,\
server=https://infomaniak.com/nic/update,\
login=mon_login,\
password='mon_pwd'\
sous_domaine.mon_domaine
En fait, j'ai ajouté les informations liées à mon prestataire Infomaniak en fin de fichier.
J'ai ensuite lancé le service par
sudo systemctl enable --now ddclient
Pour vérifier que tout se passe bien je lance la commande sudo ddclient -query
et j'obtiens alors quelque chose que je trouve bizarre :
use=if, if=eth0 address is 192.168.1.20
use=if, if=lo address is 127.0.0.1
WARNING: found neither ipv4 nor ipv6 address
use=if, if=wlan1 address is NOT FOUND
WARNING: found neither ipv4 nor ipv6 address
use=web, web=dnspark address is NOT FOUND
use=web, web=dyndns address is xx.xxx.xx.xx
use=web, web=loopia address is xx.xxx.xx.xx
use=web, web=https://ipv4.infomaniak.com/ip.php address is xx.xxx.xx.xx
Le xx.xxx.xx.xx est mon adresse IP que je masque ici.
Ce que je trouve bizare, c'est que DDClient semble faire une requête non seulement à Infomaniak que j'ai ajouté mais aussi à dnspark, dyndns et loopia qui sont pourtant commentés dans le fichier /etc/ddclient.conf et donc pas à prendre en compte.
Du coup, je me pose la question s'il y a une autre fichier de configuration de DDClient qui demande d'interroger des prestataires que je n'ai pas choisi ?
Merci pour vos lumières !
Sujet: DDClient, mélange de fichiers de configuration ? (Lu 5387 fois)
sujet précédent - sujet suivant
